Shoot!!! I can't figure out how to spin it?

Finishing up on th 57 Gilman

Front view

Crows nest with seat

Half Tower with Folding Crows Nest

Neat rolled edge hard top on custom half tower

Old model Mako 22 matching console lines dead on!!!

Nice poleing platform.

Drop in the rod holders rear seat.

Call me at 850 554 6172 for any and all work that is my cell and I'll answer it almost any time.   Tim Scallan

This guy is the best in town. You're not going to get beeter work anywhere and the prices are great. If you're EVEN thinking about a tower or nest, now would be the time and this would be your guy.

--------------------------------------------------------------------------------

Please do not support any of the captains or vessels on the list below. They support the SOS plan and intend destroy the recreational fishery for you and I.

http://saveoursector.com/supporters/supporters_full.aspx

If you agree with the above, please copy and paste this as your signature as well.

I did give a guy directions to breeze fabricators today when he stopped me at that store on the corner by your shop!

           http://www.accutechcarpet.com/    850-529-1335

                                                  Before                   After

Thanks

24 Cape Horn "Rig Runner"

Twin 200 HPDI Yammies

Twin 200 HPDI Yammies

"Wishin' I was Fishin'"

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

2101 Century Bay / 150 Yamaha - Team "Reel Gooder"

2700 Triton / Twin 225 Mercury Optimax - Team "Over the Edge"

Emerald Coast Custom Rods

Will you please PM me a ball park idea of what a t-top with fold down crows nest is running?  I've got a 22' Hydra-sports bay boat.  Also want to add low profile hand rails to the bow, no more than 4' long each. Can't really do it until later this summer, but I want to budget for it now.

Reid

Twin 200 HPDI Yammies

but on to your problem. i have a 15' jon boat that needs a bow rail and poling platform with holddowns for a small generator. also maybe a light setup. im thinking bent two 90* arms inside a fixed tube that will swing up/down. can lock by drilling 1-2 holes for a lock pin. end of 90* arm has a plate for attaching lights. just thinking out loud in case i forget this when i come to see you.

and yes, breeze fab is absolutely awesome! they did the top and leaning post on my 20mako.

____________________________________________________

gulf breeze 32563

"if you expected me to say yes, then you wouldn't have asked"

fred angeles

pensacola imports (mercedes benz repair/maintenance)

3000 mobile hwy

pensacola, fl 32505        mon-thurs 6am-5pm

850-791-6607

Drop in the rod holders rear seat.


Caracal 18 CC

tim and crew did an amazing job on my new seat. it started with a idea and tim made it a reality. these guys can do anything. i can not say enough. very happy with the seat and i would highly recommend him for future work. p.s  the cushions are great as well! here are some before and after pics.

Caracal 18 CC

I have a full tower with controls that you built for me when you had Affordable Alum. , I'm having problems now and wondered if you have the ability to come to the boat and do some welding.   I don't have a trailer and keep the boat behind the house.  I have two supports that have fallen out comepletly and almost every weld is cracked or broken.  please let me know if this is fixable without putting the boat on a trailer.  Thanks in advance.

That's great news you're portable, it's a 28 Mako and i believe the tower is maybe 6 or 7 yrs old.  I'll call you and let you know when a good time to meet is.  The boat is in Santa rosa Shores on a canal.  Here is a pic of it, maybe you will recognize it.

           http://www.accutechcarpet.com/    850-529-1335

                                                  Before                   After